As temperatures rise across South Africa during the summer months, farmers often notice a gradual decline in their dam water levels. With prolonged heat, dry winds and increasing agricultural water demands, some water loss is inevitable. However, not every drop in water level can be attributed to evaporation.

For farmers who depend on stored water for irrigation, livestock and everyday agricultural operations, understanding the difference between evaporation and seepage is an important part of protecting their water resources.

While evaporation is a natural process, excessive seepage can indicate an underlying problem with a dam’s ability to retain water. The challenge is that the two can appear remarkably similar, particularly during the hottest months of the year.

Understanding evaporation during summer

Evaporation occurs when water at the surface of a dam changes into vapour and enters the atmosphere. The rate at which this happens depends on several environmental factors, including temperature, humidity, wind speed, solar radiation and the exposed surface area of the water.

During particularly hot and windy periods, evaporation losses can become substantial, especially in shallow dams with large surface areas.

A dam that is relatively shallow and spread across a wide area generally exposes more water to the atmosphere in relation to its storage volume than a deeper dam with a smaller surface area. However, evaporation is not necessarily consistent from one day to the next. A particularly hot, dry and windy day can result in greater water loss than a cooler, more humid day.

This variability makes it difficult for farmers to determine whether a falling water level is simply the result of summer conditions or whether another problem is contributing to the loss.

When water loss is more than evaporation

Unlike evaporation, seepage occurs when water moves through the soil beneath or around a dam.

Earth dams depend on suitable soil conditions and adequate compaction to retain water. Where the soil is excessively permeable, poorly compacted or affected by cracks and other weaknesses, water may gradually escape through the dam floor or embankment.

In some cases, seepage develops as a dam ages or as changes occur within the soil structure. Animal burrows, root systems, erosion and deterioration around pipes or other structures can also create pathways through which water escapes.

One of the difficulties with seepage is that it is not always visible.

Water can move into the underlying soil without producing an obvious surface leak. A farmer may therefore assume that declining water levels are the result of summer heat, while the dam is actually losing water through a combination of evaporation and seepage. Over time, these additional losses can significantly reduce the amount of water available for agricultural use.

Five warning signs farmers should look for

Although a professional assessment may be necessary to establish the exact cause of water loss, there are several practical indicators that farmers can monitor.

1. Water levels dropping faster than expected

A noticeable decline in water level during hot weather is normal. However, if the dam continues losing water at an unusually rapid rate, particularly during cooler or less windy periods, further investigation may be necessary.

2. Persistent wet patches below the dam wall

Unexplained damp areas, soft soil or unusually green vegetation on the downstream side of a dam wall may indicate that water is moving through the embankment. These signs should not be ignored, particularly if they are accompanied by erosion, sediment movement or increasing water flow.

3. Changes in the dam wall or surrounding soil

Cracks, depressions, animal burrows and visible erosion can create or indicate weaknesses in the dam structure. Regular inspections can help identify developing problems before they become more serious.

4. Water loss continuing during cooler weather

Evaporation generally decreases when weather conditions become cooler and less favourable for evaporation. If water levels continue falling at a similar rate, seepage or another source of water loss may be contributing.

5. Unexplained changes in water usage

Before concluding that a dam is leaking, farmers should also review irrigation withdrawals, livestock consumption, pumping activity and any other water being removed from storage.
A change in operational water demand can sometimes explain an unexpected decline in water levels.

A simple way to monitor water loss

One of the most useful steps farmers can take is to establish a consistent water-level monitoring routine.
Installing a clearly marked water-level gauge or using a fixed measuring point allows changes to be recorded over time. Measurements should ideally be taken at the same time each day, alongside basic observations of weather conditions, rainfall and water withdrawals.

For a more practical comparison, farmers can also use a simple evaporation test involving a container of water placed near the dam. By comparing changes in the container’s water level with changes in the dam, it may be possible to identify differences that warrant further investigation.

However, this is only a rough screening method. A container does not reproduce the exact evaporation conditions of a large dam, and water-level changes alone do not provide a complete water balance.
The important principle is to establish what is normal for a particular dam and investigate significant deviations from that pattern.

Why sealing a dam matters

Where excessive seepage is identified, improving the dam’s ability to retain water can make a meaningful difference to long-term water availability.

Depending on the nature and severity of the problem, solutions may include repairing damaged sections, improving soil compaction, addressing structural weaknesses or using specialised earth dam sealing technologies.
Modern polymer-based sealing products offer an additional option for certain seepage problems.

Products such as DAMFIX Wet, for example, are designed to reduce seepage in earth dams by moving into porous areas within the soil and forming a sealing barrier as the material absorbs water, expands and bonds with the soil.
An advantage of this type of treatment is that it can be applied to suitable dams while they still contain water, avoiding the need to drain the entire dam for treatment.

However, no single sealing method is appropriate for every situation. The condition of the dam, the soil composition and the nature of the water loss should guide the choice of solution. Suspected structural failures or concentrated leakage through an embankment require appropriate technical assessment rather than relying on a sealing product alone.

Protecting the water already available

For South African farmers, water security is not only about how much rain falls or how much water can be extracted from a borehole. It is equally about how effectively existing water resources are stored and managed.
Evaporation will always form part of the water balance of an open dam, particularly during the summer months. Excessive seepage, however, is a potential source of avoidable water loss.

By monitoring water levels, inspecting dam structures and addressing problems before they become severe, farmers can improve the performance of existing water storage infrastructure.

Ultimately, the first step in protecting stored water is understanding where it is going. Before accepting a falling dam level as an unavoidable consequence of summer heat, it is worth establishing whether the dam is losing more water than the weather alone can explain.